Spiralbaum
Spiraltree
genuine highlight
high quality design
innovative decorative effects
durable
convincing product quality
eco-friendly product
made of wood –
a sustainable resource
easy to assemble and take down
optimum transport packing
Models



Size comparison of the two spiraltree models
  spiraltree   Tisch-Spiralbaum

Details

The Spiraltree is a premium design highlight. A tree that can be used for years and will always delight as it offers so many decoration possibilities. The complete lack of dropping needles makes the Spiraltree the perfect alternative to a conventional Christmas tree. Decorate with electric lights, candles or glass balls as you choose to produce a stunning effect every year.

The Spiraltree is milled from a single sheet of plywood and can be raised to one of two heights using a base cross and one or two poles.

Spiral length approx. 10.8 m or 35' 6"
Number of holes 56 (5 mm dia.)

Supplied without decoration
Details subject to change without notice





  Scope of delivery spiral tree   The Spiraltree table model is a practical alternative for small rooms and can also be very attractively decorated. Both versions are easy to store when collapsed and are extremely easy to re-assemble, year after year.

Spiral length approx. 3.7 m or 12' 1"


Scope of delivery spiral tree table model
    spiraltree pack




Spiraltree pack
approx. 81.5 x 80 x 11 cm
weight: 7 kg

 

  spiraltree table model pack






Table Spiraltree pack
approx. 39.5 x 39.5 x 4.7 cm
weight: 2 kg
Decoration suggestions

Decoration suggestionsDecoration suggestionsDecoration suggestionsDecoration suggestionsDecoration suggestionsDecoration suggestionsDecoration suggestions
Decoration suggestions
Decoration suggestionsDecoration suggestions
Tisch-Spiralbaum Tisch-SpiralbaumTisch-SpiralbaumTisch-Spiralbaum
Impressions

OWI spiraltree trade fair booth

Spiraltree Impressions

Spiralbaum Impressionen Spiralbaum Impressionen Spiralbaum Impressionen Spiralbaum Impressionen
Spiralbaum Impressionen Spiralbaum Impressionen
Spiralbaum Impressionen
Assembly instructions

assembling the spiraltree

Photos: Sebastian Kruthoffer

Download the assembly instructions as pdf file PDF-Icon
Download the OWI Spiraltree brochure as pdf filePDF-Icon

  No. 1 – 5 spiraltree, 100 cm.
No.
1 – 3 and 6 – 8 spiraltree 195 cm.

1. Check the contents of the package – these should consist of:

  • 1 plywood spiral
  • 2 wooden poles
  • 2 plywood base pieces
  • 1 wing nut
  • 1 wing bolt

2. Take the base pieces and put them together at right angles.

3. Place the wing bolt through the hole in the base assembly. Screw the wing bolt into the threaded hole in the first pole and hand-tighten it.

4. Lift the Spiraltree bottom plate and insert the threaded section at the top of the pole through the hole in the centre of the spiral.

5. Now stand the tree up. Place the base assembly in the middle of the bottom plate. To attach it firmly to the pole attach the wing nut and screw it hand-tight. The tree is now about 1 m high and ready to be decorated. If the tree is not tall enough, attach the second pole to increase the height to over 1.9 m.

  6. To increase the height of the tree screw the two poles together.

7. Lift the bottom plate of the Spiraltree and insert the threaded section at the top of the pole through the hole in the centre of the spiral.

8. Now stand the tree up. Place the base assembly in the middle of the bottom plate. To attach it firmly to the pole attach the wing nut and screw it hand-tight. The tree is now over 1.9 m high and ready to be decorated. The bottom plate may now lift off the ground as a result of tension in the plywood. Simply place a book or other heavy object – preferably Christmas presents – on the bottom plate or pull it down. After a short time it will sink to the floor under the weight of the decorations.

Attention – Safety warning
Please note that as the Spiraltree is made of wood it is flammable. Keep the Spiraltree away from open flames and lights. You should also take care not to trap your fingers when you assemble or dismantle the Spiraltree.

Contakt

OWI-Logo

OWI GmbH
Formteile aus Holz und Kunststoff


Rodenbacher Straße 44-46 · D-97816 Lohr a. Main Tel.: +49 (0)9352 509 - 0 · Fax: +49 (0)9352 509 - 100
info@owi-lohr.de · www.owi-lohr.de
www.spiraltree.net

Monday – Thursday
07:30 – 12:15 and 13:00 – 16:30

Friday
07:30 – 12:15 and 13:00 – 14:45


Imprint

Your contacts

Frau WethSpiralbaumFrau Miller
Frau Weth
Tel. +49 (0) 9352 509 120
E-Mail weth@owi-lohr.de
Frau Miller
Tel. +49 (0) 9352 509 119
E-Mail miller@owi-lohr.de